ADOS GreenStik Tile Floor & Wall Adhesive ADOS GreenStik Tile Floor & Wall Adhesive
ADOS GreenStik Adhesives are environmentally friendly products with the following features: Exceptionally low VOC Low odour Non-toxic Non-flammable No solvents ...
ADOS GreenStik Adhesives are environmentally friendly products with the following features:
- Exceptionally low VOC
- Low odour
- Non-toxic
- Non-flammable
- No solvents
- Water based
ADOS GreenStik Tile Floor & Wall Adhesive is an off white, acrylic based, non slump, pre-mixed floor and tile sealant for interior floor and wall tile installations. It is formulated for bonding all ceramic tiles (except high lugged tiles) to a wide range of surfaces: hardwood, plywood, particle boards, timber, concrete, plaster board, tile & slate underlay, plaster and painted surfaces. The use of correctly installed tile & slate underlay for laying floor tiles on timber or porous subfloors is recommended to avoid tiles cracking.
Easy repositioning while adhesive is still wet allows for moving tiles into the right position before adhesive sets. Once dried the tile sealant it is resistant to water and suitable for use in kitchens and bathrooms. It is not recommended for continuous water immersion areas like shower floors and similar.
ADOS GreenStik Tile Floor & Wall Adhesive is an environmentally and user friendly floor and tile sealant with professional strength.
Features & Benefits
- Water resistant – Suitable for use in kitchens and bathrooms. Not suitable for permanent immersion in water
- Pre-mixed floor and tile sealant
- Non slump
- Exceptionally Low VOC – For improved air quality and reduced health risks particularly for those with allergies and chemical sensitivities
- Low Odour – Installer friendly. No harmful fumes. Suitable for use in confined spaces and areas without ventilation
- Non-toxic – Beneficial for your health and a good choice for the environment
- Non-flammable – For a safe work environment
- No solvents – Ideal for bonding materials likely to be damaged by solvent based products
- Easy clean up with water
- Easy repositioning while still wet
- Made in NZ for NZ conditions
- Isocyanate free
Uses
- Formulated for all ceramic floor and wall tiles (except high lugged tiles). Also suitable as a Marble tile sealant.
- Recommended for us on most flooring substrates such as hardwood, plywood, particle boards, timber, concrete, plaster board, tile & slate underlay, plaster and painted surfaces.
- The use of correctly installed tile & slate underlay for laying floor tiles on timber or porous subfloors is recommended to avoid tiles cracking.
ADOS GreenStik Adhesives are environmentally friendly products with the following features:
- Exceptionally low VOC
- Low odour
- Non-toxic
- Non-flammable
- No solvents
- Water based
ADOS GreenStik Tile Floor & Wall Adhesive is an off white, acrylic based, non slump, pre-mixed floor and tile sealant for interior floor and wall tile installations. It is formulated for bonding all ceramic tiles (except high lugged tiles) to a wide range of surfaces: hardwood, plywood, particle boards, timber, concrete, plaster board, tile & slate underlay, plaster and painted surfaces. The use of correctly installed tile & slate underlay for laying floor tiles on timber or porous subfloors is recommended to avoid tiles cracking.
Easy repositioning while adhesive is still wet allows for moving tiles into the right position before adhesive sets. Once dried the tile sealant it is resistant to water and suitable for use in kitchens and bathrooms. It is not recommended for continuous water immersion areas like shower floors and similar.
ADOS GreenStik Tile Floor & Wall Adhesive is an environmentally and user friendly floor and tile sealant with professional strength.
Features & Benefits
- Water resistant – Suitable for use in kitchens and bathrooms. Not suitable for permanent immersion in water
- Pre-mixed floor and tile sealant
- Non slump
- Exceptionally Low VOC – For improved air quality and reduced health risks particularly for those with allergies and chemical sensitivities
- Low Odour – Installer friendly. No harmful fumes. Suitable for use in confined spaces and areas without ventilation
- Non-toxic – Beneficial for your health and a good choice for the environment
- Non-flammable – For a safe work environment
- No solvents – Ideal for bonding materials likely to be damaged by solvent based products
- Easy clean up with water
- Easy repositioning while still wet
- Made in NZ for NZ conditions
- Isocyanate free
Uses
- Formulated for all ceramic floor and wall tiles (except high lugged tiles). Also suitable as a Marble tile sealant.
- Recommended for us on most flooring substrates such as hardwood, plywood, particle boards, timber, concrete, plaster board, tile & slate underlay, plaster and painted surfaces.
- The use of correctly installed tile & slate underlay for laying floor tiles on timber or porous subfloors is recommended to avoid tiles cracking.
