Banjo flow control (in) C0SA0 Banjo flow control (in) C0SA0
Port size: Ø 4 ... 16 mm O/D tube, BSP threads Norgren Pneufit® C fittings are ready to use, offering...
- Port size: Ø 4 ... 16 mm O/D tube, BSP threads
- Norgren Pneufit® C fittings are ready to use, offering fast assembly with no need for tools providing optimum flow.
- Pneufit® C offers a broad range of over 1,000 composite push-in pneumatic fittings to complement our established all brass Pneufit® series.
- Releasable stainless steel grab-ring to grip PA or PUR tube (85 or 95 durometer).
- Nickel plated brass components provide corrosion and contamination resistance and an extended life.
- Pre applied thread sealant on all taper threads and recessed captive O-ring on parallel threads provides optimum rapid sealing.
Technical features
Medium:
Compressed air
Operating pressure:
10 bar (145 psi) max.
Vacuum:
750 mm of Hg
Thread sizes:
M5, M6, 1/8, 1/4, 3/8 and 1/2 ISO G, ISO Rc and ISO R
Ambient/Media temperature:
-20°C ... +60°C ( -4 ... 140°F)
Tube sizes:
4, 6, 8, 10, 12, 16 mm
Tubing types:
PA 11 or 12 PUR 85, 95 or 98 durometer
Warning:
The Norgren Pneufit® C range must not be used in vehicle air braking or ancillary systems. For push in fittings suitable for these applications, please refer to the Fleetfit range.
Materials:
Body: PBT Seals: NBR (silicone free) u-packing and O-rings Threaded bodies: nickel plated brass Release sleeve and backing ring: POM Grab-ring: stainless steel Collar: nickel plated brass Thread sealant: chemitech G175L
- Port size: Ø 4 ... 16 mm O/D tube, BSP threads
- Norgren Pneufit® C fittings are ready to use, offering fast assembly with no need for tools providing optimum flow.
- Pneufit® C offers a broad range of over 1,000 composite push-in pneumatic fittings to complement our established all brass Pneufit® series.
- Releasable stainless steel grab-ring to grip PA or PUR tube (85 or 95 durometer).
- Nickel plated brass components provide corrosion and contamination resistance and an extended life.
- Pre applied thread sealant on all taper threads and recessed captive O-ring on parallel threads provides optimum rapid sealing.
Technical features
Medium:
Compressed air
Operating pressure:
10 bar (145 psi) max.
Vacuum:
750 mm of Hg
Thread sizes:
M5, M6, 1/8, 1/4, 3/8 and 1/2 ISO G, ISO Rc and ISO R
Ambient/Media temperature:
-20°C ... +60°C ( -4 ... 140°F)
Tube sizes:
4, 6, 8, 10, 12, 16 mm
Tubing types:
PA 11 or 12 PUR 85, 95 or 98 durometer
Warning:
The Norgren Pneufit® C range must not be used in vehicle air braking or ancillary systems. For push in fittings suitable for these applications, please refer to the Fleetfit range.
Materials:
Body: PBT Seals: NBR (silicone free) u-packing and O-rings Threaded bodies: nickel plated brass Release sleeve and backing ring: POM Grab-ring: stainless steel Collar: nickel plated brass Thread sealant: chemitech G175L
